[Jewelry making - Article 00153] - Re: [Orchid] Good quality stones at a good price?

[coralnut]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Cori,

    When I count the number of wheels you use, I see eight (8). What
    kind of machine(s) are you using? Are you using SiC or diamond (must
    be diamond - right)? Why do you find it necessary to use so many
    grits? I would suggest the 400 and 3000 are just added steps that
    take time away from doing other things. 

    Also, I would suggest you try using cerium Ox on felt for your final
    polish on quartz, agate, jasper. Other oxides can also be used on
    other stones....such as Linde A with leather for jade, etc. Remember,
    diamond is an abrasive.....it always abrades. Even 14K leaves a
    slight greasy surface on a smooth agate (at least to my eyes). Cerium
    however, produces an absolute mirror finish. Give it a try and you'll
    see. 

Cheers from Don in SOFL
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________