[Jewelry making - Article 00503] - Re: [Orchid] LP Tank and Fire Inspection

[Ray]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     Try http://www.msha.gov/Accident_Prevention/Tips/acetylenegas.htm 

    Thanks for posting this link! Good stuff! I'll look into "flame
    arresters" I already have check-valves all around. FWIW, my tanks are
    on a special cart that I bought at the welding store with chians to
    hold in the tanks. I wish I knew the size of these tanks, but they
    are approx. 4' tall. (I use a massive cutting torch to cut apart
    100oz ingots of fine silver.) 

Ray
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________