[Jewelry making - Article 01393] - Re: [Orchid] Wicking off excess solder on sterling

[Alastair]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi Tracey,

    I have been theRe: tried fine braided copper wire used in electric
    cables, well fluxed. This will suck up solder, but the risks of
    melting previous joins, and of the solder penetrating even deeper
    into the silver are not worth it. After wicking off the solder you
    will still have to file, sand and polish afterwards to remove the
    last traces of solder. Forget the wicking and go straight to the
    filing and sanding, it is quicker and safer. 

Cheers, Alastair
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________