[Jewelry making - Article 00663] - Re: [Orchid] Correct Epoxy Mixing

[John Sexton]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Ernie:

    I have several places I use epoxy and I have found the best way is
    to use a syringe. They are readily available at hobby and craft
    stores. Sometimes in Fly Fishing shops. They are available in
    different sizes (their capacity). 

    Draw out however much you need, squirt it out on your mixing pad,
    old playing cards flat piece of glass etc., mix and use. Only
    precaution is that you will need two. one for the epoxy and one for
    the hardener. 

Jack
Omni Crafts
John (Jack) Sexton
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________