[Jewelry making - Article 00638] - Re: [Orchid] Paste Solder Problems

[Bethkatz]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Dear Rebecca,

    Thank you for your reply I know that Unique Solutions does make
    excellent products. There are times, that have been discussed on the
    board where people are having this or that problem. You purchased the
    product two years ago, not one as indicated in your email. Yet,
    still, two years later the product works perfectly. Who knows how the
    syringe that you were having problems with, got the crack. I am
    letting those on the Orchid board know your experience, since it is
    important that people know the quality of the product and the
    integrity of the company. I will be at William Holland the last week
    in August, where Florida Society of Goldsmiths are having a week long
    workshop. I welcome anyone to stop by and see a demonstration. 

    "i finally got the problems with the #70 worked out..i tried a
    smaller torch tip and voila..flow and connection..i believe i got a
    bad syringe of the #65 though, i had to open all syringes to test
    this past week and the one that initially turned into a black mass
    ,it seems, had a tiny crack almost undecetable to the naked eye under
    the rim/handle of the unit that apparently caused an ingredient to
    evaporate quite slowly (it's been a year)..the contents of that
    particular tube seemed grainy to begin with..after opening another
    syringe of the product, i have found the texture to be much more
    "buttery", and it dispenses more smoothly as well, and the hardest
    solder you produce -you were out of as i recall - by thursday night
    when i bought the lot..c'est la vie..all negative impressions are
    recanted...it was one bad tube spoiing the use of the others for
    me!..now what else is it you sell??...hope to see you at tailgating
    on thursday pm..which week will you be at wm. holland? rebecca" 

Beth Katz Unique Solutions, Inc.
Paste Solder and Powder Solder for Metalsmiths and Jewelers
http://www.myuniquesolutions.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________