[Jewelry making - Article 00604] - Re: [Orchid] Correct Epoxy Mixing

[James Binnion]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    The best way to measure epoxy is by weight. Get a sensitive scale
    and use two small disposable measuring trays to place on the scale
    and add the resin to one then place the second one on the scale and
    add hardener to it till you have the right ratio of hardener to
    resin. then mix the two together. This is just about the only way to
    always get the right ratio of hardener to resin. Anything else is
    just guess work. 

Jim

James Binnion
jbin AT mokume-gane.com
James Binnion Metal Arts
http://www.mokume-gane.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________