[Jewelry making - Article 00568] - Re: [Orchid] Metal Molds - How To

[Wade, Ronald L]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Thanks Jeff,

>     I have a suggestion worth trying on making a metal mold. It is a
>     product sold by Cotronics..... called Duralco 4540. 

    I'll look it up and evaluate it. I'm real close on the method and a
    couple of experiments have turned out well. I'm just waiting to get
    to a point where I can replicate it, document it, picture it, and
    share it. 

    And, it sounds like the process would be very similar but substitute
    the epoxy for the pewter. And if I can do it with the pewter, it
    would be more economical, I buy scrap pewter plates and mugs for
    under $3 a pound. 

    Thanks for your thoughts and keeping this thread alive. 

Regards
RLW (Ronald L. Wade)
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________