[Jewelry making - Article 00567] - Re: [Orchid] RTV mold from a metal model?

[mjoat]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Here are number of web sites for more than you will ever need to
    know about casting and mould making RTV Smooth on has great videos
    and are worth the cost. 

    http://www.smooth-on.com 
    http://www.freemansupply.com 

    Is an industrial supply for the casting industry they have good info
    on their site. 

    http://www.hobbycast.net/video.htm 

    Video's of making of a mould and casting resin 

    http://www.sculptor-iangb.com/mould.htm
    http://www.oakridgehobbies.com/g_scale/g_83a.html
    https://www.micromark.com

    Micromark has small kits for casting along with the low temp metal
    to use in the RTV or to make a metal model. 

    The usual disclaimer apply satisfied customer 

glen, been there done that, and got it all over the shop!
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________