[Jewelry making - Article 00187] - Re: [Orchid] Finishing Using Flex Shaft

[jlh/nlh]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     I bought a supply of the 3M disks and was not impressed. They were
>     used up pretty quickly. Some of them just plain fell apart. 

    Sounds to me like you were using way too much pressure. Correctly
    used, you barely brush the surface you are polishing and they will
    last a long time. I've been using them for years both on the flex
    shaft and onthe large polisher and havent had one come apart yet. 

Jerry in Kodiak
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________