[Jewelry making - Article 00185] - Re: [Orchid] Intimidated by casting

[jlh/nlh]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     weigh it, calculate by specific gravity, which give you the
>     estimated weight. Then you add 1/2 oz to 2 ounces to that,
>     depending on the size of the casting. 

    If you are doing one-offs or small lots, just multiply the
    calculated metal weight, including sprues, times 1.3 to allow for the
    button. 

Jein Kodiak
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________