[Jewelry making - Article 00312] - Re: [Orchid] Warning: Eye Safety and MRI's

[Brian Corll]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    When doing something that is going to create tiny bits of metal
    flying everywhere, I've found that the best and cheapest solution is
    to buy one of those clear plastic face shields that flip and down and
    fit on your head sort of like an Opti-Visor. I think mine was less
    than ten bucks. Unless you're creating abstract sculpture (please
    don't), I don't think any metal will penetrate it. 

Brian Corll
Brian Corll, Inc.
1002 East Simpson Street
Mechanicsburg, PA 17055
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________