The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Vulcanized molds refuse to fill  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Kathy Johnson
Date: Fri Jul 07 23:49:33 2006
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     Does anyone out there want to share their secrets for getting
>     molds to fill correctly? Sometimes I spend all day wax injecting
>     and don't get any wax models made. It is getting frustrating.

    I had a similar problem just yesterday. I had six very thin flat
    pieces all molded in Silastic silicone molds, and couldn't get any of
    them to fill. I tried everything that others had written about out
    here (VERY timely thread! thank you all!) but nothing worked. I
    wasted nearly an entire injection pot of wax trying different
    methods. I kept getting close, but not 100%. Finally I held the mold
    closed with two other Silastic molds instead of wood or metal sheets.
    That worked, because the other soft molds "gave" enough to allow the
    middle one to expand for filling, but held it together without
    pressing too tightly. But then the wax model wasn't evenly flat--it
    was wedge shaped because my hand pressure wasn't evenly distributed.
    So I put the three molds into one of those mold clamp tools and tried
    that, along with powdering all the air vent cuts heavily every single
    time I injected the mold. That worked perfectly, and I finally got
    acceptable models from all six molds.

Kathy Johnson
Feathered Gems Jewelry
http://www.fgemz.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project