[Jewelry making - Article 00988] - [Orchid] Colorit Process

[Salvador Alcaraz]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hello,

    I am interested in more detailed instructions that those found in
    Gesswein webpage about the COLORiT process (I have made copy & paste
    below). 

    Does somebody know a link to a pdf file o similar, or want to
    explain the process a bit more? 

    Best regards,
    Salvador Alcaraz

          The COLORiT Process 

          Both a mechanical bond and a chemical bond are required to
          ensure durability and colorfastness. Inlaid areas must be
          undercut, and proper application and curing instructions must
          be followed. COLORiT is easy to apply and dries in minutes
          under the special curing light. From cleaning to final curing,
          the entire process usually takes no longer than 30 minutes;
          curing comprises roughly half that time and requires only
          minor attention.
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________