[Jewelry making - Article 00181] - [Orchid] Tiny coil springs

[doug]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hey gang,

    Does anyone on the list know where I can find small coilsprings? I
    need to come up with at least a dozen, or so (minimum), for a series
    I'm creating. All of these, ideally, will be 1-1.5mm in diameter by
    6-10mm in length, with either loops or tapers at each end;
    preferably loops. If push comes to shove, I could probably go as
    large as 2mm in diameter, but I'd much rather go with the smaller
    diameters, if at all possible. Thanks, in advance! 

Douglas Turet, G.J.,
Turet Design, LLC
P.O. Box 242 Avon, MA 02322-0242
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________