[Jewelry making - Article 00232] - [Orchid] Fantastic & cheap matt for vacuum caster

[frank goss]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Continue from:
http://www.ganoksin.com/orchid/archive/200603/msg01322.htm

    I just wanted to take a moment to thank the person that posted about
    the shelf liner as a pad for their vacuum table. ( I went through an
    upgrade recently and lost the posting I had saved) I have always had
    a problem with getting a decent seal on my home made vacuum table.
    The pump is a large one and pulls a good 30 inches of mercury in no
    time, once it seals. The shelf liner worked as described and since I
    cast with a centrifuge I don't worry about the heat issue on the pad.
    Quick and easy seal. Problem solved. Thanks Orchid for teaching an
    old dog a new trick.

Frank Goss
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________