[Jewelry making - Article 00968] - [Orchid] Best material for pet tags?

[Wendy Welch]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I'm looking to get some non-precious metal pet tags manufactured.
    They'd need to be: 

    -Made with a very durable metal that won't tarnish because the pet
    may dip them in their water dish, go outside in the rain and dirt,
    etc. 

    -Made with a metal to which a clear epoxy would adhere 

    -Be flat, but have a raised bezel around the outer edge on both
    sides 

    -Have a small hole cut out of the material (not soldered on) 

    What's the best metal and manufacturing process for this? 

Many thanks for your time and expertise!
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________