[Jewelry making - Article 00943] - Re: [Orchid] Rhino versus JewelCAD

[Stephen Mulligan]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Had to put in my two cents worth - I use Jewelcad all day every day
    as the designer for a manufacturing company. It is not, as so often
    seems to be assumed, a program based on the use of a library of
    parts. I create most things from scratch, and do so easily and
    quickly with a series of relevant and specific tools that were
    designed with jewelry in mind. I have worked with many other
    programs, including Rhino and Solidworks, and found it tiresome to
    have to learn these huge programs in order to boil it down to what I
    actually need. Trust me - I can design any piece of jewelry that I
    can imagine with Jewelcad, what I can't do is design a car or a
    bridge and then test it for stress factors and nor would I want to. 

Steve Mulligan
www.robertcorio.com
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________