The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Setting square cabs  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: IMMENO1Ls
Date: Thu Apr 13 00:01:49 2006
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

rockey -

>     It's the corners that I need help on 

    square cab bezels are pretty much the same as round/oval bezels.
    some jewelers use the 'L' procedure with two pieces of bezel bent
    90%, one side of each has to be the width or length of one side of
    stone and the other side longer. these 2 'L' pieces are put together
    to form a square in which the cab will fit snugly and then the two
    corners are soldered. it works okay but leaves you with the two
    soldered corners sharper than the 90% bent corners. 

    i just bend the bezel strip (26g is best for me, doesn't melt with
    harder solder) around the cab so the solder seam falls in the middle
    of the bottom side - that way all the corners are the same. since i
    usually make the bezel width a little higher than the stone, when i
    dry fit it to snug it up i overlap the two ends and clamp with a
    locking hemostat, then saw along one side of the hemostat - the edge
    seam matches up better. 

    if the bezel is a little higher than you need, mark the desired
    width around with small dividers, and sand down on a 220 grit disc. 

    ive
    who knows that finding your own successful way of doing things gives
    you more time to do other things - your way, of course.
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project