[Jewelry making - Article 00243] - Re: [Orchid] All Metals Saw

[Terry Ogden]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Pete

    I could not find a saw on the Indian site, these are the only 2 I
    know of and a source for blades. 

    http://www.harborfreight.com 

    Items 42307 and 93211 

    I will not be able to send a link for the blades, Enco is off line
    right now. Enco carries blades from 1 inch to 6 inch diameter with
    mounting holes from 1/4 to 1 inch for jewelers and the price is very
    reasonable. 

    That covers circular type, if you were looking for this type 

    http://www.amazon.com/exec/obidos/ASIN/B0001VNRGC/theganoksinpr-20 

    It will use the standard jeweler handsaw blades. It does not require
    pinned blades 

    Sorry other than these I don't know of another type except handsaws 

Terry
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________