[Jewelry making - Article 00157] - Re: [Orchid] Economy Rolling Mills

[joanna gollberg]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    well, i have an economy rolling mill. it is made by PePe. i got it
    several years ago when i was a few years into my business. it cost
    $250. 

    now i use it everyday. it works great for my purposes. in the
    beginning, it "skipped" when i put too much pressure on the rollers,
    but i took apart the gears and added a piece of steel, and now it
    does not skip. frankly, i can do almost anything i want with this
    economy rolling mill, so i will have to be a VERY rich jeweler to
    buy a durston in the future. 

    i say go for it, better to have some use and open new ways of
    working than not have one at all. and the one you are talking about
    with the interchageable rollers...i have used one just like that in
    a previous shop, and it was great too! 

joanna gollberg
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________