The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] An old engraving block  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Brian P. Marshall
Date: Sun Apr 02 20:59:57 2006
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     Putting glue in the holes is spray painting a Chippendale
>     chair...... 

    I agree! 

    Besides, it would be useless. The JB Weld would eventually wear and
    the holes would become sloppy - perhaps worse than they currently
    are. The amount of pressure that you can put on the pins by cranking
    the screw is very high. You need a properly fitting brass or steel
    pin. 

    By the way, we rarely use all those fancy pins, attachments, and
    fixtures that are sold by the jewelry and engraving suppliers. Most
    are the wrong shape, or - in the case of the pins - damage the
    article being engraved. Don't waste your money... 

    95% of the time we use leather, rubber, neoprene, urethane, or soft
    wood pads between the jaws. (I even used to use lead sheet when I was
    a puppy, but that's not done any more...) 

    Formed to fit fixtures are made of pitch, shellac, hot glue, Bondo,
    and the various new thermoplastics. These are used directly between
    the jaws or on top of pine wood blocks. The larger blocks for holding
    awkward shapes have a "T" profile. On top is your fixtured work, and
    the center leg is between your jaws. 

    Really the only pin type fixture used regularly are those I use to
    hold rings. And most of those are made here in the studio and are not
    available in the fancy kits... 

Brian P. Marshall
Stockton Jewelry Arts School
Stockton, CA USA
209-477-0550
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project