[Jewelry making - Article 00031] - Re: [Orchid] Jewelry Making and Vision Problems

[Lisa Orlando]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Off-list inquiries inspire me to clarify my post: 

    My trifocals are non-progressive and only for working. They were
    designed so that the "distance" is what I would need to see what a
    class instructor is doing, the "middle" is so I can find the tool I'm
    looking for, and the "close" is considerably closer than reading
    distance (but still annoys me). 

    In addition, the "close" and the "middle" are reversed from their
    normal position, i.e. the "close" is actually in the middle of the
    lens, not at the bottom. I tend to look down when I'm searching for a
    tool and straight ahead when I'm fussing with a tiny piece of wire. 

Lisa Orlando
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________