[Jewelry making - Article 01711] - Re: [Orchid] Copper and Silver Electroforming

[Ian W. Wright]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi Amanda,

    You can improvise a tank of any size which will be quite long
    lasting by simply draping a sheet of polythene sheeting into a box
    which could be cardboard, wood, metal or whatever and hold the
    sheeting firmly in place with a few bulldog clips. An alternative
    would be one of the cheap plastic stacking storage boxes which, over
    here, are available in all the 'five and dime' type shops. I bought a
    couple yesterday which are about 1 foot square and 9 inches deep with
    a snap on lid for 1UKP each (about $1.75US or $2CDN). You can heat
    these with a fish tank-type heater and thermostat. 

Best wishes, Ian
Ian W. Wright
SHEFFIELD UK
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________