[Jewelry making - Article 00172] - Re: [Orchid] Old casting machine crucible worn out

[KARAT46]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Replacement Crucible for Centrifugal machines are easily available.
    For US machines I know of only 4 sizes/types If it is small as you
    described then there are only 2 that you have to choose from. They
    are pretty reasonable and I would buy the one closest to your size.
    Minor adjustment to you Cradle and Crucible holder can be made to fit
    this. 

    If you can check Swest or older catalogs you might find an
    illustration/sketch with sizes / dimensions. This may help you
    identify the one you need. 

    You are welcome to send me a sketch of your crucible with dimensions
    so I can match up with what is available out there. 

Regards
Kenneth Singh

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________