[Jewelry making - Article 01291] - Re: [Orchid] Dissolving Superglue Problem

[Daniel Grandi]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi,

    My Son and I use Super glue on our Slot cars/ (small electric
    racecars) usually to glue the magnets into the motors in the correct
    spot. When we take the motors apart for rebuilding, sometimes it is
    neccessary to remove the magnets. We heat the can of the motor and
    the magnets fall out. Magnets are susceptible to heat and can loose
    their effectiveness so we don't heat them too much... perhaps 200 oF
    this can be achieved with a hair dryer. 

    Perhaps heat may work to remove the superglue on your Alabaster
    bowls? Hope this helps, 

Daniel Grandi
Racecar Jewelry Co. Inc.

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________