[Jewelry making - Article 00770] - Re: [Orchid] Product Query: Magnetic Tumblers

[Brian P. Marshall]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Most machine tool suppliers have flat 6" x 6" or larger
    demagnetizers. Price ranges from about $60 on up. They are used to
    demagnetize pliers, screwdrivers, cutting tools, and the like. They
    work fine on shot placed in a plastic bowl on top of them. Shake it a
    few times so that all of it gets exposed to the field. 

    Make sure you get the FLAT "surface" demagnetizer - not the "tunnel"
    type where you pass the article through the hole in a coil. 

Brian P. Marshall
Stockton Jewelry Arts School
Stockton, CA USA
209-477-0550
instructor AT jewelryartschool.com

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________