[Jewelry making - Article 00446] - Re: [Orchid] Fixing wax carving holes

[Sumner Silverman]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Yes, you are seeing bubbles underneath the surface. The trick is to
    hold the hot tip in the wax, wiggle and poke until the bubble rises.
    You then might have to let it cool a little and add a bit to the
    surface. All this is done with a gentle touch. 

szs

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________