[Jewelry making - Article 00160] - [Orchid] 95-5 Plaladium as casting Alloy

[Jim Zimmerman]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi All,

    Has anyone tried to use 95-5 Palladium as a white gold alloy for 14k
    White gold. If so, how did it turn out? Would this work for either
    18k or 10k.? The Palladium white gold I have set seemed as stiff as
    18k that was nickel based. I've got the Palladium in the shop, but
    thought I would get orchids input first. 

Jim Zimmerman
jimzim AT hay.net

 
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________