[Jewelry making - Article 00090] - Re: [Orchid] S88 Sterling Alloy

[FRANKGO]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Jay, I have been using Uniteds S88 for about 10 years and have
    posted about it on this forum, although not recently. It is still the
    best I have ever used, both for casting and forming. I have pieces
    that have lain on my bench for months on end and show no tarnish.
    This will save you a great deal of time and energy when it comes to
    keeping the stock looking fresh. Great that you were introduced to it
    I have recommended it to everyone I know that works in Sterling.. You
    might also try the gold alloys at united. I especially like the
    bright yellow I think the number is 200. Also if you ever need help
    there I have always delt with Dave Zimmer who will direct you to the
    person to talk to if he can't answer your questions. United has some
    great people and great products. (usual disclaimer goes here)
    1-800-999-fine is their phone. 

Frank
Goss

 
____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________