[Jewelry making - Article 00966] - Re: [Orchid] Johnson's paste wax

[daniel]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I like using ACF-50, it works great and you only need to spray it on
    once every couple years if its worn a lot. A 13 oz can is $13.00 US
    and you can protect a heck of a lot of jewelry with this stuff. 

          ANTI-CORROSION,13OZ AEROSOL An ultra thin compound, ACF-50
          will penetrate tight lap seams, around rivets and screws,
          between spars and skins. Effective on all metals, cables,
          switches and avionics. Actually displaces corrosion causing
          moisture. Then it acts as a barrier, keeping moisture away and
          terminating electrolysis for about one and a half years.
          MIL-C-81309 E type II & III. Minimum flash point 140 degrees F.
          ORM-D Requires ground shipping only. 

    I get it from Wickaircraft.com

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________