[Jewelry making - Article 00960] - Re: [Orchid] Johnson's paste wax

[Metaloids]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    As this topic has kind of run its course I'll throw in another
    thought. 

    I have, as is my way, gone another route. I have in the past bought
    the very finest clear lacquer I could afford. 

    Then cut it to water thin and gently air brush the work. The lacquer
    appears to be absorbed into the oxides and or sulfides. It seals
    thing 

    up. There is little change in color and I feel it is more stable
    then wax. You will need a little spray booth and ventilation. Food for
    thought. 

Bill
Thank you, Bill, Deborah, Michele & Sarah
Reactive Metals Studio, Inc.
www.reactivemetals.com
800/876-3434, 928/634-3434, F928/634-6734

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________