[Jewelry making - Article 00858] - Re: [Orchid] Polishing of intricate pieces

[Phillip Scott]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Vikas,

    If you have no luck finding someone to polish your filigree pieces,
    you may look into a magnetic pin finisher. The larger ones have a
    speed control so you can adjust how agressive the polishing action
    is. Depending on how intricate and tight the filigree is, you may
    have some pins stuck into tight curves but they are usually quite
    easy to remove. These tumblers should do a very nice job on filigree
    because the pin size is so small, it allows the pins to get into
    very tight places. 

    If you have any further questions on these types of tumblers, Please
    feel free to contact our Technical Sales Team anytime" 

Respectfully,

Phillip Scott G.G.
Technical Support & Sales
Rio Grande
1-800-545-6566
technicalsupport AT tbg.riogrande.com

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________