[Jewelry making - Article 00804] - [Orchid] Polishing of intricate pieces

[Vikas Sodhani]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I have designed several rings with filigree work between two shanks.
    My problem is in polishing the fine filigree. My polisher says he
    cannot do it. His tools cannot reach the small crevices in the ring.
    Are there jewelers out there who could do this for me or does anyone
    have any tips. 

    Any leads would be most appreciated. 

vikas

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________