[Jewelry making - Article 00749] - Re: [Orchid] Half round dead soft Argentium wire

[Cynthia Eid]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi Grace,

>     One other question - are your pieces made completely out of AS?
>     Mine are usually a combination - how would heating at say 450
>     degrees effect the sterling or gold?? 

    The other metals will not be affected by the heat hardening
    process----whether it is at 580 degrees F, 450 degrees, or less. 

Cynthia Eid
http://www.cynthiaeid.com

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________