[Jewelry making - Article 00076] - Re: [Orchid] Silver soldering forged steel

[jazzhorse]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi all

    Thanks for all the Ideas 

    I ended up drilling a hole in the center concho, then tig welding a
    short piece of rod to back of the leaf. 

    I then put the rod through the hole and tigged it again from the
    back side of the Cocho. 

Garth

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________