[Jewelry making - Article 01156] - [Orchid] Fantastic Grinder

[John]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Though some might be interested in a fantastic grinder I have
    purchased and used with great results. The unit is called the
    Intarsia Grinder is manufactured by Al Sesona of St. Augustine,
    Florida. The grinder allows anyone to grind smooth, straight 90
    degree angles on just about anything. Will also cut 60, 45, and 15
    degrees. I use it to block facet rough for doping at true center of
    the rough to reduce waste of valuable rough. Can be used with any
    metal, stone, shell, etc. to produce clean, finished lines for
    jewelry applications. Al is a master machinist, lapidary, and
    silversmith. Al can be reached at 1- 888-354-7448.

John, Miami

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________