[Jewelry making - Article 00983] - Re: [Orchid] Setting non calibrated stones

[coralnut]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     setting a stone in a too-big setting results in the stone looking
>     like it crashed into the piece, because the setting is all buckled
>     in around the stone. 

    I agree with Susannah's assessment that using a setting that is too
    large results in not only a poor looking setting but also one that is
    unsafe! 

    On the other hand, using a too small setting can produce the same
    results. The prongs usually spread too wide to achieve a solid
    purchase on the stone's girdle, weaken the prongs and often results
    in a lopsided setting. 

    One has two choices when faced with this problem; create a custom
    setting...not too difficult a job after a bit of practice, or follow
    Douglas's suggestions. Personally, if time is a factor or one's
    skill level does not include making a custom setting, I would follow
    Doug's way! (Sounds like a new philosophy doesn't it?). Very nicely
    explained Doug. 

    Cheers from Don at The Charles Belle Studio in SOFL where simple
    elegance IS fine jewelry! dcdietz AT comcast.net

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________