[Jewelry making - Article 00712] - Re: [Orchid] Resurface old anvil?

[Ayalla Dollinger]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Where do you buy an anvil for jewelry work? I saw one 50 lb. anvil at
    a Harbor Freight store, but it was made of cast iron, and painted
    with a heavy coat of oil-based paint. I've been looking at smaller
    and small ones, but they don't have the lovely surface nor the "horn"
    of a large anvil. Thanks for any suggestions. 

Ayalla D.

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________