The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Drilling a hole in gold  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: LEESSILVER
Date: Fri Dec 09 04:49:07 2005
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Make a drill starter dimple at the spot where you wish to drill. 

    By the way. You can buy a tool from a local hardware store that will
    dimple the metal before drilling. The one I have is spring loaded.
    The tip is placed against the metal at the location of the desired
    home. Press the tool down against the metal. At the correct pressure
    the tool will cause the tip to snap against the metal leaving a
    perfect drill starter dimple. The tool requires quite a bit of
    pressure so it will not work in all cases. In those cases a small ball
    burr will work great to grind a small starting dimple. Hold the
    grinding tool steady so it does not walk on the metal leaving a
    gouge.

    Use a smaller drill to drill a starter hole. 

    Use bur life to lubricate the drill bit. 

    Remove the drill from the hole many many times. The drill shavings
    can cause a small drill to bind in the hole thereby causing the drill
    to break. 

    Enlarge the hole with a drill a couple of sizes larger that the
    previous drill. 

    Use a burr once the hole is large enough to fit the burr. Never
    force the drilling. Just be patient and work slowly. Drilling silver
    is a difficult task also.

Lee Epperson
Hope to see you in Tucson

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project