[Jewelry making - Article 00272] - Re: [Orchid] Watch case terminology

[John Donivan]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi there,

    These push/spring loaded bars that hold the straps are called "spring
    bars".. They are made in different lengths & widths etc. They can
    cime straight or curved. You need to make sure you replace with equal
    size that fits the watch case-check thru a jewelry supplier/watch part
    supplier.. If you don't have one- try Stuller Inc.,Lafayette, LA or
    Otto-Frei/Jules Borel, Oakland Ca.. 

Stay Sane & Healthy!!!!!
Sincerely,
Jo-Ann Maggiora Donivan

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________