[Jewelry making - Article 00306] - Re: [Orchid] First Fold forming project...

[marilyn smith]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     I annealed the piece, but now I am wondering if I annealed to the
>     correct temp. I couldn't tell how soft the piece was because it was
>     tiny (about 3/4" long), but I am timid with the torch. My problem
>     is probably a combination of factors. Thanks very much and I can't
>     wait to go the next class.

    Kim, an easy way to see if the metal is annealed is to put some flux
    on it. When the flux melts, the metal is annealed. With time, you
    will recognize the color of the metal and not need to do this. I
    don't think that the mandrel will help pop it open as well as a
    knife. Of course, it will help adjust the diameter of the ring
    itself. Start prying with a knife and then get fingertips on either
    side of the open side and thumb tips on the fold. Pull the metal
    apart with your fingertips as you push with your thumbs. You have
    not told us the gage or metal and that can make a difference.

marilyn

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________