[Jewelry making - Article 00199] - Re: [Orchid] Preparing pitch bowl

[Zoe Hardisty]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    The way I was taught how to make the pitch bowl is using an old
    bowling ball. You cut it in half, and use the pitch on the cut side
    with some type of craddle on the other side. Or you could use the
    pitch on the rounded part depending what your working on. That would
    certainly give you the weight, and you wouldn't need lots of pitch to
    fill the bowl. 

    Just a thought. 

Zoe Hardisty

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________