[Jewelry making - Article 00126] - Re: [Orchid] Recommendations for a mapp/air torch?

[Dave Arens]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi Natalie,

    Here are 2 suggestions for torches that work very well for chain &
    other small work. 

    I make lots of chain, the majority of it with fused or soldered
    links. For fusing or soldering, I use a Proxxon butane fueled torch
    or a Bernz-o-Matic propane fueled pencil torch. The BoM torch has a
    4 ft long hose that connects to the regulator on a disposable
    propane or MAPP gas tank. The flame is adjustable on both torches. 

    The Proxxon runs from $39.95 to $50 depending on where it's
    purchased. The BoM torch is around $50. 

Dave


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________