[Jewelry making - Article 00015] - Re: [Orchid] Rivet Clamp?

[Tracey Bell]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Great ideas, thank you! 

    A bit more info, I can't heat or use acetone on the piece when I am
    done because there are paper, plastic, or other found objects
    sandwiched between the pieces of metal. I don't have a drill press,
    I use a hand crank drill. I've decided this is the biggest problem.
    I think I am going to go with a small drill press with a machinist
    vise. I was trying to avoid another large tool that I need to plug
    in, but using a hand drill takes for ever. 

Thanks Again!
Tracey

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________