[Jewelry making - Article 00014] - Re: [Orchid] [Source] Stainless steel sheet or flat wire

[Zoe Hardisty]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    This might be a little off the mark but...depending if you want to
    go this route or not you could try a medical suppler of medical grade
    metals, then you can get some surgical grade steel. I know they will
    sell to jewelers if you buy enough, but there minimum order may be to
    much for you. Or you could see if there is any jewelers in you area
    that make body piecing jewelery and ask if you can buy a little of
    there stock. This might not be what your going after but maybe it
    will give you some new places to look for your metal. 

Zoe Hardisty


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________