[Jewelry making - Article 00938] - Re: [Orchid] Soldering Silver bezel wire to Copper

[Zoe Hardisty]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Thanks guys,

    Yeah I have paste flux that I'm putting on it, I keep pickling it to
    keep it clean and oxide free, and brass brushing it. I guess I'll
    have to keep trying. I think putting wire or the titanium v idea
    would probably help a lot. It just suck, I can do this no messing at
    school with there acetylene torches and people around to help but not
    at home. I even was two torching it (one under to heat the piece then
    adding the other to coxing the solder while someone else places the
    solder with my pic). Ridiculous steps. 

Thanks again,
Zoe Hardisty

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________