[Jewelry making - Article 00845] - Re: [Orchid] Rivet Clamp?

[Ed Art2]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    As I recall from school days we used "Super Glue", then drilled,
    filled, sanded, polished, or any other cold processes. When ready to
    de-bond (before riveting/cold joining) we would heat and hot pickle,
    and clean with acetone / nail polish remover, or simply soak in
    acetone then wipe up. Afterwards we riveted or any other cold
    joining style desired.

I hope this is helpful,
Respctfully,
Ed

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________