[Jewelry making - Article 00082] - Re: [Orchid] Bead Blaster and Humidity

[Bethkatz]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    One of the best ways to make your sand baster clump free and work
    100% of the time is to change the source of the air from a
    compressor to tanks of nitrogen. It is much more expensive to use the
    nitrogen tanks than electricity but it does solve the problem. Once
    you start to use the nitrogen, you will appreciate the steady stream
    of sand and constant  pressure. You also are very fast and efficient
    when doing it this way since you want to make the most of the
    compressed gas.

Good luck.

Beth Katz
Unique Solutions, Inc.
Paste Solder and Powder Solder for Jewelers and Metalsmiths  
http://www.myuniquesolutions.com

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________