[Jewelry making - Article 00071] - Re: [Orchid] Bench Grinder and Polisher

[Katou]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I just bought the spindles for a double-ended motor that I have. One
    right, one left. I am also considering making the shrouds for the
    buffer, and adding a fan of some kind to suck away the dust and
    such.  I only have the commercial models to look at. 

    Is all this necessary? Could I forgo the suction fan? I don't think
    I can forgo the shrouds, the buffer I used at my nightschool course
    threw off buffing compound something fierce. 

    I can make the shrouds and build in a ventilation fan, but that
    makes the whole thing take forever to build, and then makes it
    massive for storage. I only have a small shop that has to do many
    different things, it's not set up for jewellery all the time. 

Katou

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________