[Jewelry making - Article 01198] - Re: [Orchid] Flex shaft Quick Release Handpiece

[Milt Fischbein - Jewellery Artist]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>         this #20 hand piece is a very good tool. there is no wobble
>     with the burs which is very helpful when setting. the burs do not
>     get stuck in the collet every other time. and the gripping seems to
>     hit my fingers better than the #10. 

Mathew

    What about the quick release lever on the #20. Is it easy to use. Is
    it located in such a way that you do not fatigue your hands if you
    have to operate it often 

Thanks
Milt Fischbein

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________